Lynwood W76 Wood Burning Stove with Cast Iron Door, Black Colour Finish
The Sierra Flame Lynwood W76 is a welcome addition for wood burners everywhere, and is what a wood burning stove should be: efficient, low emissions, and provides great flames with a maximum viewing area.
Versatile, the Lynwood W76 wood-burning stove adapts to any room and will create a cozy atmosphere in any space.
EPA 2020 certified, the Lynwood W76 wood burning stove brings warmth without compromising on air quality.
REQUIRED ACCESSORIES
Mandatory to complete the unit: Reduce Clearance Heat Shield
KEY FEATURES
-
- 2020 EPA Compliant
- 78% Maximum Efficiency
- 13,784 to 57,674 BTU/hr
- Heats up 2000 ft²
- Maximum Log size – 21″
- Massive glass for fire viewing
Specs

W76
|
Type |
Solid Fuel Room Heater |
Type of Combustion |
Non-catalytic |
Fuel Type |
Dry Cordwood (15% moisture) |
Main Material |
Cast Iron |
Firebox Isolation |
Vermiculite |
Flue Exit |
6” (150 mm) Back to top connector |
Recommended Heating Area |
450 to 2,000 ft.2 (42 to 185 m2) |
Nominal Firebox Volume |
1.55 ft.3 (0.044 m3) |
Maximum Burn Time 1 |
14 hours |
Maximum Heat Output (dry cordwood) 2 |
57,700 BTU/h (16.91 kW) |
Overall Heat Output Rate (min. to max.) 2 3 |
13,784 BTU/h to 57,684 BTU/h
(4.04 kW to 16.91 kW) |
Average Overall Efficiency 3 |
71% (HHV) 4 76% (LHV) 5 |
Optimum Efficiency 5 |
78% |
Average Particulate Emissions Rate 7 |
1.81 g/h (EPA/CSA B415.1-10) |
Average CO5 |
120 g/h |
1 Maximum Burn Time will vary depending on design of home, climate, wood type and operation.
2 Heat Out Range results are determined during specific emissions test established by the EPA.
3 As measured per CSA B415. 1-10 stack loss method. The Maximum Heat Output value is representative of a morefrequent re-fueling cycle than specified.
4 Higher Heating Value of the fuel is obtained per CSA B415. 1-10 test method.
5 Lower Heating Value of the fuel is obtained per CSA B415. 1-10 test method.
6 Optimum overall efficiency at a specific burn rate (LHV).
7This appliance is officially tested and certified by an independent agency. Particulate Emissions rate is obtained using EPA Test Method.
8 Carbon Monoxide Emissions rate results from Test Method CSA B415. 1-10
Gallery
[ngg src=”galleries” ids=”29″ display=”basic_thumbnail”]